This shear bolt is for some Ariens large frame models and has a length of 2". This product is sold as a single pack (bolt) per order, 10 pack, 20 pack, and 50 pack.
Product Details
- Fits common/popular Ariens, large frame models
- Length: 2", Size: 5/16-18
- Replaces Ariens, Snapper and John Deere
The Oregon Shear Pin is crafted for specifically for Ariens products. This product is sold as a single pack (bolt) per order, 5 pack, 10 pack, or 20 pack.
Product Details
Replaces: Ariens 532005 and John Deere AM123342
Measures: 1-7/16" in length
Thread: 1/4/20
Fits: compact snow throwers SN039-112
Replaces: 01036500, 510016, 51001600, 532005, 53200500, 5907142
This Auger Assembly rubber paddle set fits the Oregon 73-050 complete MTD auger assembly for 21" single-stage snow throwers and includes hardware.
Product Details
- Rubber paddle set
- Fits 21" single-stage snow throwers 31**1** and 31**2** models (1990-2005)
- Fits the Oregon 73-050 complete MTD auger assembly
- Includes hardware
This replacement reinforced snow thrower paddle set helps you take the snowy season on with force. Oregon replacement parts are built to meet or exceed OEM standards.
Product Details
- Replaces Toro part number 23-3730
- Fits models S200 and S620
- Measures 17-11/16" x 2-3/4"
This Oregon skid shoe will guide you evenly through snowy winters. We offer these on our site as a 1 pack or 2 pack.
Product Details
- Replaces MTD part number 784-5038B
- Use on 1988 and 1989 20" and 26" snow throwers, models 225 and 590
- 7/16" x 2" slots, center to center spacing
- Will also fit Toro large frame snowblowers
- For MTD use with our 73-024 wear bar
This snow blower skid fits all Ariens snow blowers, models 924080 and 924082 with 24" auger (1960 and newer). We offer these are on our site as a 1 pack or 2 pack.
Product Details
- Snow blower skids
- Fits all Ariens snow blowers, models 924080 and 924082 with 24" auger (1960 and newer)
- Center to center: 3"
This Oregon scraper allows you to leave a clean trace while protecting your snow thrower's chamber. This product is sold on our site in 1 pack and 2 packs.
Product Details
- Replaces Toro part number 23-3170
- Fits models S200 and S620
- Measures 19-5/8" long by 1-3/4" wide
- Use with our 73-003 paddle
This auger assembly fits 21" single-stage snow throwers 31**1** and 31**2** models (1990-005). We offer this product on our site in 1 pack and 2 pack options.
Product Details
- Auger Assembly
- Fits 21" single-stage snow throwers 31**1** and 31**2** models (1900-2005)
- Use with Oregon 73-050 rubber paddle sets
- Replaces MTD
Product Details
Dimensions:
- Packaged Length: 8.6"
- Packaged Width: 8.8"
- Packaged Height: 2.4"
- Weight (with Packaging): 0.895 lb
Replaces:
- Briggs & Stratton - 695540
- Rotary - 4197
- Stens - 115-327
